Table of Contents
Advertisement
SC732G Chassis Manual
Figure 4-7: Installing 3.5" and 2.5" Hard Drives
4. If a hard drive is already present, remove it by carefully pulling the sides of
the hard drive carrier outward.
5. Remove the hard drive from the hard drive carrier.
6. Insert the new hard drive into the hard drive carrier.
7. Insert the hard drive carrier into its bay in the front of the chassis until it clicks
into a locked position.
8. Close the front cover.
Warning: Only enterprise level HDDs are recommended for use in this chassis.
1
4
4-8
1
4
Advertisement
Table of Contents
