Step 4: Connecting Fm/ Mw Antennas; Step 5: Connecting The Power Cord - Philips 78 User Manual

Connections
Step 4: Connecting FM/ MW
antennas
fix the claw into
the slot
1
Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM (75 ) jack. Extend the FM antenna
and fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
10
001-035-MX2500D-78-Eng2
MW
antenna
1
FM
antenna
2
10
Step 5: Connecting the
power cord
1
2
~ AC MAINS
Power Outlet
After everything is connected
properly,
1
Set the VOLTAGE SELECTOR to the
local power line voltage.
2
Plug in the AC power cord to the power
outlet.
Never make or change any connections
with the power switched on.
Helpful Hint:
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
7/20/04, 3:11 PM
FRONT FRONT FRONT REAR REAR SUBWOOFER
RIGHT LEFT CENTER RIGHT LEFT
8239 300 32892