D-Link DSM-331 Quick Installation Manual page 4

STEP 2:
DSM-331
STEP 3:
DSM-331
reMOte Battery aCtIvatIOn
rePlaCIng reMOte Battery
4
router
12V 1A
12V 1A
Power
12V 1A
pull out the plastic tab from the remote
CONNECT THE rOUTEr
using the ethernet cable
CONNECT THE POWEr
caution: connect the power only after
connecting the a/V or hdMI cable (not
included) and the ethernet cable.
- turn the remote control over and locate the sliding battery
panel on the rear of the unit
- press the top at the battery panel down and simultaneously
remove the battery panel
- Insert the battery (coin cell cR2025) with the + side facing
up in the slot
- place the battery panel back over the compartment and
slide it up gently until the panel snaps securely into place
dSM-331