Using The Steam Cleaner; Filling The Water Tank - ALDI MD 16941 User Manual

AUS

Using the steam cleaner

PLEASE NOTE!
Risk of damage.
Damage may be caused to surfaces and to the cleaner foot if worn
cleaning cloths are used.
− Replace worn microfi bre cloths immediately. Contact customer
service for replacement cloths.

Filling the water tank

PLEASE NOTE!
Risk of damage.
The appliance may be damaged by additives in the water.
− Do not add cleaning agents to the water tank.
− Use distilled water if possible in order to prevent the build-up
of limescale.
Make sure that the appliance is switched off and unplugged.
− Pull on the cap fi tting on the water tank
tank . Fill the water tank with 470 - 500 ml of tap water or distilled
10
water, using the measuring cup supplied with the appliance. Do not
overfi ll the water tank.
You can also take the water tank off the product in order to fi ll it (see
Fig. E).
− Fit the cap back on the water tank opening.

Using the steam cleaner

The steam cleaner is designed to release and remove stubborn dirt from
smooth, heat-resistant surfaces in the household without the use of chemical
solvents. The steam cleaner can also be used to freshen up curtains, clothing
and upholstery.
− Prepare the steam cleaner and accessories for use, as instructed above.
16
www.medion.com.au
in order to open the water
11
AFTER SALES SUPPORT
1300 884 987
AUS