Powerful range extender and wireless router (5 pages)
Summary of Contents for Securifi Almond2015
Page 1
Easy Setup Guide. 1-855-969-7328 For tips on how to setup call our tech-support @ Mail us at support@securifi.com Stylus Almond 2015 12V, 1A Power Adapter/ Door Sensors Motion Sensor Peanut Plug Ethernet Cable Plug the power adapter into your Almond’s socket, which is located on base of Almond 2015. Then plug your ethernet cable into your Almond’s ethernet port, which is the top-most port on the right-side of your Almond 2015.
Page 2
S T E P 2 Creating Almond Account. Almond Login Access your Almonds and your home devices from anywhere The rest of the Wizard will help you create Email Almond Account sign-up requires a PC or an Almond account so you can control your Open the Almond app Password Router and sensors from anywhere in the...
Page 3
S T E P 4 Setting up the door/window sensors Remove the back of the sensor by Pushing in the oval button at the top of the device, releasing the back from the unit. Insert the included battery, noting the correct + and - polarity. Tap the “Add Sensor”...
Page 4
Add Sensors Adding Sensor... Zigbee Please wait Remove Remove all Sensors Now tap the “Join/Reset” button as shown and the sensor should be added to your Almond. The LED will flash to indicate that the sensor is being added. Battery Tamper switch Join/Reset button Reattach the rear cover of the sensor and make sure it snaps in place properly.
Page 5
S T E P 7 (OPTIONAL) Adding Auto Arm/Disarm Rules Note: To be able to enable automatic detection of your presence at home,you should be using Almond 2015 as your primary Internet router. Connect your phone to your Almond 2015 wifi network and open the Almond App. Tap on the on the top right of the screen and select “Switch to Local Connection”...