Save & Exit - Gigabyte GA-N3050N GSM PLUS User Manual

2-6 Save & Exit
Main Advanced
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot Override
Launch EFI Shell from filesystem device
` Reset System with ME disable ModeMEUD000
& Save Changes
Press <Enter> on this item and select Yes to save the changes to the CMOS. Select No or press <Esc>
to return to the BIOS Setup Main Menu.
& Discard Changes
Press <Enter> on this item and select Yes to cancel the BIOS changes. Select No or press <Esc> to return
to the BIOS Setup Main Menu.
& Restore Defaults
Press <Enter> on this item and select Yes to load the BIOS factory default settings. The BIOS defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
& Boot Override
Allows you to select a device to boot immediately. Press <Enter> on the device you select. Your system
will restart automatically and boot from that device.
& Launch EFI Shell from filesystem device
Allows you to launch the EFI Shell application (shell.efi) from one of the available filesystem devices. Press
<Enter> on this option and the system will restart to the EFI Shell screen automatically.
` Reset System with ME disable Mode
ME will run into the temporary disable mode.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Security Boot Save & Exit
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
- 29 -
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit