Operation Methods - RUSTA 901512880101 User Manual

ENG

OPERATION METHODS

• Connect the hose: Insert the hose end into the hose socket at the front cover and then
hook it. (Fig. 1)
• Remove the hose: Press the adaptors at both side of the hose end and then pull the
hose accessories. (Fig. 2)
• Connect the telescopic tube to the curves end of the hose. (Fig. 3)
• Connect nozzles to the tube for different cleaning purpose:
Floor brush (adjusted to the type of ground) for carpet or floor (Fig. 4). Combined
brush and nozzle for sofa, wall surface, curtain, corner or space between furniture
and etc. (Fig. 5). To adjust the suction effect of the nozzle, adjust the position of the
control on the handle.
• Turn on the vacuum cleaner: Insert the plug of cord into the power socket which
conform to that on the label for power supply, and press the on/off switch pedal, the
machine could start working (Fig. 6).
• Cord rewinding: Hold the plug and pull out the cord; press the cord rewinding pedal,
that power cord will be drawn in.(Fig. 7).
Fig. 1
Fig. 4
FAILURE CLEARANCE
LESS VACUUM POWER OF THE CLEANER
1. Empty the full dust cup or the dust bag.
2. If blockage is found in ground brush, hose or tubes, the machine can be re-operated
only after the blockage is cleared away.
NOTE! This vacuum cleaner has an over heat protection. If your vacuum cleaner suddenly
stops, unplug and let it cool down completely for at least 30 minutes before you turn it on
again.
4
Fig. 2
Fig. 5
Fig. 3
Fig. 6 Fig. 7