ReSound CP1PBW-V Technical Manual page 13

Unlock Housing (Front Housing)
Flip the device assembly over and pry open the Front Housing from the frame. Squeeze the two prongs on the hinge and slide
the Front Housing away from the hinge pin. Repeat the same process on the other hinge
Flip the PCB frame assembly to show the back side of the PCB (where the Back Housing side). Locate the hinges on the side of
the frame (see picture above) and squeeze the two prongs on the hinge to release the hinge from the frame
Not subject to issue control when printed
Doc 0191570 rev H
Page 13 of 21