Page 1
Model ILP0001 INSTRUCTION MANUAL Read before use For use with devices from the IDEAL LIFE Health Management System ™ Products may vary from images shown NOTE: The system is intended for information purposes only, for expert advice make sure to consult a healthcare professional.
Table of Contents Table of Contents Connecting Your IDEAL LIFE TABLE OF CONTENTS.....2 Cellular Pod™........7 INTRODUCTION.......3 SPECIFICATIONS .........8 PACKAGE CONTENTS.....4 FCC STATEMENT........9 LOCATION/INTERFERENCE...5 Your IDEAL LIFE Pod™......6 SERVICE REQUIREMENTS....10 08 LP0001 CellPod manual v7.0 Jan 2015...
Introduction Preface Thank you for purchasing the IDEAL LIFE Cellular Pod™, also called ILP 0001. This is an optional product that is used together with your other IDEAL LIFE products. The Pod allows you to automatically send and record information, to help you better manage your health with your health care provider. After readings are taken, they are stored and the Pod transmits them so that they can be viewed online as graphs and tables.
IDEAL LIFE Cellular Pod™ Location/Interference Location/Interference The IDEAL LIFE Cellular Pod™ uses wireless radio waves to transfer information from your IDEAL LIFE Manager™. For the best distance and least interference, the recommended IDEAL LIFE Cellular Pod™ location is: • Away from electrical appliances such as a TV, personal computer or a cordless phone •...
Your IDEAL LIFE Pod ™ Your IDEAL LIFE Cellular Pod ™ LED Display Antenna attachment Internet Cable RJ45 Jack AC adapter jack USB Port (not used) 08 LP0001 CellPod manual v7.0 Jan 2015...
Information may be transmitted using cellular Internet. Make sure Pod is Powered On. To do this, simply connect the small end of the power supply into the power AC jack on the back of the IDEAL LIFE Cellular Pod™ marked POWER. Plug the other end into an AC power outlet. Your IDEAL LIFE Cellular Pod™will automatically power up once it is plugged in to an AC power outlet.
IDEAL LIFE Cellular Pod ™ Model: ILP 0001 IDEAL LIFE Cellular Pod™ Connectivity: USB and Ethernet Antenna: External Operating System: Linux Display: 4 LEDs + 4 Signal Strength Bars Power Source: Class 2 Power Adapter 6.3V 1A Operating Temperature/Humidity: 32 F - 131 F / Below 85% relative humidity...
FCC Statement FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Service Requirements Service Requirements In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. It is the responsibility of the User to report the need for service to our Company or authorized agent. Please refer to the original location of purchase for service details. 08 LP0001 CellPod manual v7.0 Jan 2015...