C Getting Started - Remington PF7400 Instructions Manual

ENGLISH

C GETTING STARTED

•
It is recommended that you use your new shaver daily for up to two weeks to
allow time for your beard and skin to become accustomed to the new shaving
system.
, CHARGING YOUR APPLIANCE
•
It is recommended to fully charge your appliance before using for the first time.
• Please refer to the charge times shown in this book.
•
Ensure the product is switched off.
• The adaptor automatically adjusts to a main voltage between 100V and 240V.
• Connect the shaver to the adaptor and then to the mains.
• Connect the adaptor to the charge stand and then to the mains (PF7500).
• Place the charge stand on a flat surface (PF7500).
•
Place the shaver in the charge stand with the charge pins contacting (PF7500).
, Charge Level Indicators
• Run time from fully charged is up to 40 mins. (PF7400), up to 50 mins
(PF7500)
• Charge time from empty is 16 hours (PF7400), 120 mins (PF7500).
, Note: To preserve the life of your batteries, let them run out every 6 months
then fully charge.
, Quick charge function
• PF7500 has a 5min quick charge feature that will provide enough charge for
1 shave (3 mins).
F INSTRUCTIONS FOR USE
• For corded use connect the shaver to the adaptor, then to the mains. (PF7500)
• Make sure your shaver is properly charged.
• Switch the shaver on by pressing the on/off switch.
4
Charge Level
Charging
Fully Charged
Indicator
Green LED will show
Green LED will turn off