Advertisement
Advertisement
Table of Contents
Related Manuals for MID WEST PRODUCTS MH-4451
Summary of Contents for MID WEST PRODUCTS MH-4451
- Page 1 Owner’s Manual and Parts List SAVE THIS MANUAL You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a safe, dry place for future reference. ©2017 Mid West Products, Inc. Form No. M1-1604...
- Page 2 Your Lawn Sweeper comes mostly assembled on the pallet. The Hitch Assembly and Height Adjustment Handle may need attached: PARTS LIST OF MH-4451 MANUAL HITCH ASSEMBLY HEIGHT ADJUSTMENT HANDLE WIND APRON ©2017 Mid West Products, Inc.
- Page 3 Step 3: Take Wind Apron (65) and fasten Velcro to both Side Hamper Tubes (42). Fasten the other Velcro strap to the rear of the Hamper Pivot Brackets (44). (See Image: Above – Right) ©2017 Mid West Products, Inc. Form No. M1-1604...
-
Page 4: Operation
Remove Wheel by removing plastic Hubcap and Snap Ring. Apply RETINAX LC (Available from Mid West Products – 937- 337-3641) grease to Wheel Gear and Pinion Gear. NOTE: Apply grease to the center of Pinion Gear. Lubricate at beginning of each season and every 20 hours of use, or more 5. -
Page 5: Parts Drawing
PARTS DRAWING ©2017 Mid West Products, Inc. Form No. M1-1604... -
Page 6: Parts List
2 5/16-18 Pilot Nut X-1353 2 1/2-13 Lock Nut L-59 2 5/16-18 X 3/4 HHCS 30 1-C2328 2 Pivot Support Tube 1A-3300 1 Wind Apron 1-1850 1 Adjustment Decal NI=Furnished, Not Illustrated ©2017 Mid West Products, Inc. Form No. M1-1604... -
Page 7: Instructions For Ordering Parts
GUARANTEE The merchandise you have purchased from us has been carefully engineered and manufactured under Mid West Products rigid quality standards and should give you satisfactory, dependable operation. However, like all mechanical merchandise, it may occasionally require adjustment or maintenance.
Need help?
Do you have a question about the MH-4451 and is the answer not in the manual?
Questions and answers