Programming - ABB twa-1 User Manual

System pro m electronic astronomical clock + programming key
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
6. Set the time correction of sunset time "Set"
using
+
and -, then validate by enter.
7. Activate the astro mode by selecting On
using
+
and
-
switch on the control circuit automatically
according to the astronomical parameters.
8. For 2-way clock, select channel
using
+
or
-
The symbol
if the channel is in astro mode.

Programming

Programming may be done for each day or for a group of days.
In this case instructions are common to several days.
Days: 1 = Monday, 2 = Tuesday, 3 = Wednesday... 7 = Sunday.
1. Select the prog mode using menu, then enter.
2. Select the channel
(Only applicable to 2-channel clock: TWA-2).
The number of remaining program steps appears for a short time.
3. new flashes, press
4. Choose the day(s) using
5. ok flashes. Use
-
or
makes it possible to reset the group of days if necessary.
6. Using
+
or -, select instruction state:
On or Off if your are in automatic astronomical mode.
On, Off, On
then
enter
to have the product
and validate with enter.
on main display will indicate
(C1
or C2) using
enter
to validate this new program steps.
+
or -. Validate with enter.
enter
to validate the group of days.
or Off
C1
or
C2
+
or
-,
then press enter.
if your are in expert mode.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Twa-2

Table of Contents

Save PDF