Hitachi VisionCube Service Manual page 4

SXGA+ High Resolution LCOS Projector (ES50-116CM / ES70-116CM)
Part 2
Adjustments
Mechanical Adjustments – 6-Axis Adjustment and Mirror
6
Adjustment –
6.1. Adjustment Specifications
6.2. Adjustment Procedure Overview
6.3. 6-Axis Adjustment
6.3.1. Preparation
6.3.2. Detailed Adjustment Hardware Operating Method
6.4. Adjusting The Mirror
6.4.1. ES50-116CM
6.4.2. ES70-116CM
Electrical Adjustments 1 – Adjustments Using Internal Signals
7
(Gamma Adjustment, Uniformity Adjustment) –
7.1. Adjustment Procedure Flowchart (Electrical Adjustments)
7.2. Adjustment Procedure Digest
7.3. Adjustment Procedure
7.3.1. Adjustment Preparations
7.3.2. Gamma Adjustment And Uniformity Adjustment Using
Internal Signals
7.4. Multi-Screen Color Balance Adjustment
7.4.1. Color Balance Adjustment Procedure
7.5. ID Remote Controller Operation Method
Electrical Adjustments 2 – External Signal Connection
8
Adjustments (Setup) –
8.1. External Signal Setup
8.1.1. Setup And Mode Numbers
8.1.2. Mode Number Automatic Search (Auto-Scan)
8.1.3. Concerning Mode Numbers 134~191
8.1.4. Mode Number Skipping
8.1.5. Setup Data Selection And Setting
8.1.6. Check Frequency Setting (SYNC SET)
8.1.7. Sampling Clock Setting (SAMPLE CLOCK)
8.1.8. Scaling Factor Setting (SCALING) And Position
Adjustment (POSITION)
8.1.9. Cable Compensation Setting (CABLE COMP) And
Image Sampling Phase Adjustment (SAMPLE PHASE)
~ Screen Adjustments・ ・ ・ ・ System Adjustments ~
.................. 6-2
.................. 6-3
.................. 6-5
.................. 6-5
.................. 6-7
.................. 6-9
.................. 6-10
.................. 6-11
.................. 7-2
.................. 7-4
.................. 7-6
.................. 7-6
.................. 7-7
.................. 7-13
.................. 7-13
.................. 7-14
.................. 8-2
.................. 8-2
.................. 8-4
.................. 8-5
.................. 8-6
.................. 8-7
.................. 8-12
.................. 8-13
.................. 8-15
.................. 8-19
Contents - iii