Instrument Disassembly - Sanyo HV-DX4EV Service Manual

INSTRUMENT DISASSEMBLY

1. DECK DISASSEMBLY
Perform all disassembly procedures in the order presented.
When reassembling, use the reverse procedure.
Make sure that all leads/ wiring are routed correctly when reassembling.
A. TOP COVER REMOVAL
@ Remove a screws
! Remove three screws
# Remove a screws
FIG. 1
38
B. PANEL FRONT DISASSEMBLY
! Remove 3
Hooks at
bottom
C. LOGIC PCB DISASSEMBLY
Remove 2
screws, then
remove Logic
INSTRUMENT DISASSEMBLY
@ Remove 2 Hooks at left and right sides,
Simultaneously, remove panel.
FIG.2
FIG.3
39