Kenwood KRF-V8010D Service Manual page 32

www.freeservicemanuals.info
For Australia
AUDIO section
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at
8 Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic
distortion.(FTC)
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................. 100 W + 100 W
CENTER (1kHz, 10% T.H.D. at 8 Ω one channel driven)
............................................................................................. 100 W
SURROUND (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................. 100 W + 100 W
Total harmonic distortion ........................... 0.03% (1 kHz, 50W, 8 Ω)
Signal to noise ratio
PHONO (MM) ......................................................... 75 dB (IHF'66)
CD .......................................................................... 91 dB (IHF'66)
Input sensitivity / impedance
PHONO (MM) ......................................................... 2.5 mV / 27 kΩ
CD ......................................................................... 200 mV / 47 kΩ
DVD 6CH (SUBWOOFER) ................................... 200 mV / 10 kΩ
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 kΩ
PRE OUT (CENTER, SURROUND) .............................. 1 V / 1 kΩ
PRE OUT (SUBWOOFER) .......................................... 1 V / 600 Ω
Tone control
BASS .............................................................. ±10 dB (at 100 Hz)
TREBLE .......................................................... ±10 dB (at 10 kHz)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
Notes Notes
2. Sufficient performance may not be possible at very low temperatures (0°C or less).
KRF-V8010D/V8010DW
SPECIFICATIONS
VIDEO section
VIDEO inputs / outputs
VIDEO
FM tuner section
Tuning frequency range ................................... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN, 75 Ω)
MONO .................... 1.6 µV / 15.2 dBf (75 kHz DEV., S/N 30 dB)
STEREO .............. 31.6 µV / 41.2 dBf (75 kHz DEV., S/N 30 dB)
Total harmonic distortion (DIN, 1 kHz)
MONO ............................................................ 0.6% (65 dBf input)
STEREO ........................................................ 0.7% (65 dBf input)
Signal to noise ratio (DIN weighted, 1 kHz)
U.K. and Europe
MONO .......................................................... 75 dB (75 kHz DEV.)
STEREO ...................................................... 68 dB (75 kHz DEV.)
Stereo separation (DIN, 1 kHz) .................................................. 38 dB
Selectivity (DIN, ±400 kHz) ........................................................ 50 dB
Frequency response (30 Hz ~ 15kHz) .................. +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
........................................................................ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod., 1 mV input) .......................... 50 dB
GENERAL
Power consumption .................................................................. 250 W
AC outlet
SWITCHED ........................................................... 1 (150 W max.)
Dimensions ...................................................................... W : 440 mm
Weight (Net) ............................................................................... 9.7 kg
Published in Heiloo, Holland.
(composite) ............................................ 1 Vp-p / 75 Ω
12/21/15
H : 144 mm
D : 400 mm
41