Summary of Contents for One Forall SV-1000
- Page 2 T H AN K YO U Thank you for purchasing the ONE FOR ALL Remote Control Extender. ONE FOR ALL is continuously striving to develop, produce and market high quality innovative products to remotely control your equipment. We hope the Remote Control Extender will give you the freedom of wireless control.
-
Page 3: Operation
Transmitter: Locate the transmitter in free sight of where you want to control your devices. I.e. If you use the Remote Control Extender for the bedroom TV, place the Transmitter on top of the bedroom TV. Plug the AC/DC-adapter in the wall socket and connect the DC connector to the back of the transmitter unit (See 1). - Page 4 AC C E S S O R I E S ONE FOR ALL offers you two accessories to get the best out of your Remote Control Extender. 1. Extra Transmitters. If you would like to control your equipment from more places in the house, just purchase additional Transmitters for each extra room from ONE FOR ALL.
- Page 5 I have poor range or a particular piece does not respond: 1- Adjusting the Receiver Unit When no commands are being sent, observe the Red light (LED) on the front of the Receiver Unit, it may flicker slightly. If the Red LED is glowing brightly, or does not come on at all, even when commands are sent, then adjust the sensitivity screw on the back of the receiver unit (See 3).
- Page 6 It would be helpful if you included a note detailing the problem. IF THE UNIT IS RETURNED FOR SERVICE OUTSIDE THE WARRANTY PERIOD AND/OR WITHOUT PURCHASE RECEIPT, please include a cheque to cover the cost of replacement, handling and return postage. SV-1000 DD 04-98 Printed on Recycled Paper...