Advertisement
T H AN K YO U
Thank you for purchasing the ONE FOR ALL Remote Control Extender.
ONE FOR ALL is continuously striving to develop, produce and market
high quality innovative products to remotely control your equipment.
We hope the Remote Control Extender will give you the freedom of
wireless control. Your Remote Control Extender operates with your
original Remote Control and with a ONE FOR ALL Universal Remote
Control.
T H E P RO D U C T:
The Remote Control Extender enables you to operate for example your
VCR, Satellite and/or cable Receiver in your lounge from your bedroom
TV. It can control TV, VCR, SAT/Cable plus audio equipment from
room to room.
The Remote Control Extender system comes with a transmitter, a
receiver and two AC/DC-adapters.
Transmitter
The Transmitter receives the Infrared signal from the Remote Control
and converts this into a RF signal. The transmitter is located where you
are (I.e. on top of the bed-room TV).
Receiver
The Receiver receives the RF signal, turns it back into an infrared signal
and sends this to the device you want to operate. The receiver is
located in the other room where the device is that you want to control
(I.e. The video recorder or satellite receiver).
I N STA L LAT I O N :
NOTE: A cable connection between your equipment is required.
The Remote Control Extender does not replace the cable
connection, it will extend your infrared signal.
Receiver:
Locate your receiver in free sight of the device you would like to
control. I.e. To control your Video Recorder from your bedroom, place
the receiver in direct sight of your video. You will get the best result if
you place the Receiver Unit 2 to 5 meters from your equipment E.G. on
the other side of your room.
Plug the AC/DC-adapter in the wall socket and connect the DC
connector to the back of the receiver unit (See 1).
Advertisement
