Table of Contents
Advertisement
9) M2F_32G (M.2 Socket 3 Connector)
The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs and support RAID configuration through
Please note that an M.2 PCIe SSD cannot be used to create a RAID set either with
the AMD Chipset.
an M.2 SATA SSD or a SATA hard drive and can only be used to build a RAID set with UEFI. Refer
to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array.
110
80
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole
for the M.2 SSD to be installed and then screw the nut first.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it with the screw.
Select the proper hole for the M.2 SSD to be installed and refasten the screw and nut.
Installation Notices for the M2F_32G and SATA Connectors:
Due to the limited number of lanes provided by the Chipset, the availability of the SATA connectors may be
affected by the type of devices installed in the M2F_32G connector. Refer to the following table for details.
Connector
Type of
SATA3 0
M.2 SSD
M.2 SATA SSD
a
M.2 PCIe x4 SSD*
a
M.2 PCIe x2 SSD
a
No M.2 SSD Installed
a
a: Available, r: Not available
* For AMD RYZEN
processor only.
™
_ F
_ 0
F
60
42
SATA3 1
SATA3 2
SATA3 3
a
a
r
a
a
a
a
a
a
a
a
a
- 15 -
ASATA3 0
ASATA3 1
a
a
r
r
a
a
a
a
Hide quick links:
Advertisement
Table of Contents
