Handler SANI-VAC 750 Instruction Manual page 5

1. Replacing the secondary filter
Turn off the canister and remove the
hose. Open the dust cover. Remove the
filter from behind the bag.
(See Fig. 3)
Either shake the dust out of the filter or
wash it by hand. (Make sure the filter is
completely dry before reinstalling.)
Reinsert the filter and close the dust
cover.
Replacement Filter: Order 750PF
2. Replacing the HEPA filter
Turn off the canister and power nozzle.
Remove the hose and unplug it from the
canister body. Open the dust cover.
Remove the filter from the top of the
canister by pulling the tab on the filter
toward you. (See Fig. 4)
Discard the old filter.
Reinsert a new filter by sliding it back
into the holder. Close the dust cover.
Replacement Filter:
Order 750F-FB (Set of 12)
ONLY WHEN NECESSARY
To tighten stainless steel Sani-Vac hose, grasp the hose (not by the end fittings). Twist
firmly with right hand in this direction
opposite direction clockwise
firmly into Sani-Vac opening.
Easy PDF Creator is professional software to create PDF. If you wish to remove this line, buy it now.
. Any part, or all of the hose may be adjusted. Insert cuff
DO NOT OVERWIND!
Handlermfg.com | 750 SaniVac Instruction Manual | 2012
, counter clockwise while twisting left in the