Replacing The Filters - Handler SANI-VAC 750 Instruction Manual

It is recommended the vacuum bag is changed when the full bag indicator changes color
or the suction power of the canister becomes weak.
1. Turn off the canister
2. Remove the hose and unplug it from the canister body.
3. Open the dust cover.
4. Remove the entire bag holder. DO NOT THROW IT AWAY (See Fig. 1)
5. Discard the full bag.
6. Insert a new bag by aligning the notch on the bag collar with the base of the bag
holder. (See Fig. 2)
7. Lock the bag into place under the bag holder tab.
8. Insert the bag holder by sliding the 2 prongs back into the canister body.
(See Fig. 1).
9. Replacement Filter bag 12/Set Order 750F-FB
10. Close the dust cover.
Fig. 1
Easy PDF Creator is professional software to create PDF. If you wish to remove this line, buy it now.
Handlermfg.com | 750 SaniVac Instruction Manual | 2012

Replacing the filters