JBL 705P Owner's Manual page 14

8
8
PRESETS – Provides access to six factory presets and six registers that can be used to save user-created
settings of EQ and Delay parameters.
u Load
Load Factory Preset
•
•
•
•
•
•
u Save
Save User Preset
8 {[Preset_1] (Preset_2; ... ; Preset_6}
„ Default name is "PRESET_1 (2, 3, 4, 5, 6) Preset naming is possible using ROTARY
8
8
SPEAKER SELECT – For identification, you can assign a standard channel name to the speaker selected
from this list.
u {[Left]; Center; Right; Left Side Surround; Right Side Surround; Left Rear Surround; Right Rear Surround;
Left Front OH Surround; Right Front OH Surround; Left Rear OH Surround; Right Rear OH Surround}
8
8
FRONT PANEL LED – Select "DISABLED" to defeat the illumination of the front panel LED indicators.
u {[Enabled]; Disabled}
8
8
NETWORK CONFIGURATION
u Settings – When selected, displays current
- IP Address
- MAC Address
- Subnet Mask
- Gateway
u EDIT – When selected allows editing of Network Settings
u EDIT DHCP Setting
{[DHCP]; Manual IP} Selecting MANUAL allows editing of
- IP Address
- MAC Address
- Subnet Mask
- Gateway
14
[1] EQ Flat
2: LF Boost
3: LF Cut
4: HF Boost
5: HF Cut
6: HPF
CONTROL and ENTER key. Pressing ENTER Key consecutively toggles ROTARY
CONTROL function, allowing you to either MOVE CURSOR or MODIFY CHARACTER