Table of Contents
Advertisement
Available languages
Available languages
3.
BEFORE FIRST USE
3.1
Unpacking
Remove all packaging.
„
Check for the presence of all parts and for transport damage. In case of damage or
„
incomplete delivery, please contact your dealer (
Please keep the packaging. The appliance can be stored in it if it is not used for a longer
„
period of time.
Place the appliance on a level, stable, clean and dry surface.
„
Ensure that there is sufficient ventilation. Keep a minimum distance of
„
product and other objects or walls.
3.2
Remote control – inserting batteries
For operation of the remote control,
„
needed (not supplied).
Press upward the circle on the back of the remote control to remove the battery
„
compartment cover.
Insert the batteries while observing the polarity markings.
„
Close the battery compartment cover.
„
Note: Use batteries of high quality only. Batteries of low quality might leak and cause
„
damage.
Note: Remove the batteries, if the remote control is not to be used for a longer period
„
of time, as it might be damaged by a leaking battery. If the remote control does not work
properly, replace the batteries immediately.
3.3
Remote control – using tips
Aim the remote control at the infrared receiver
„
be less than
remote control and main unit.
The remote control may be less effective
„
if:
-> there are obstacles between
the remote control and the infrared
receiver (4).
-> other remote controls are operated at
the same time.
-> the battery is low.
6
metres and within 30°. Make sure there are no obstacles between the
10.
Warranty).
2 x 1.5
V
batteries (Type: R03/LR03/AAA) are
(4)
on the main unit. The distance should
23
EN
5
cm between the
Advertisement
Chapters
Table of Contents
