Charging Internal Battery - NGS powerpump 5000 User Manual

ENGLISH

CHARGING INTERNAL BATTERY

1. Please connect the mobile charger using the USB cable
supplied via the micro USB port to a AC adaptor, Car
charger, PC, Laptop or other USB device.
2. Charging will start automatically.
3. The battery level indicator will show you the level of
battery as below.
1 LED flashing: less than 20%
1 LED stay on without flashing: 21%-40%
2 LEDs: 41%-60%
3 LEDs: 61%-80%
4 LEDs: 81%-100%
4. When all 5 lights stay on without flashing, the battery is
fully charged.
Note: Over-charge protection will prevents damage to the
internal battery.
3