Philips Flat TV Manual page 14

Clock
Most of the TV channels are not transmitting clock information.There are few cable channels but they are
at the end of the channel ring.There is no clock transmission in antenna channels. In such cases either
clock extraction is taking a long time or there is no clock
Clock
Settings
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
10
Auto clock mode
&
Select Clock with the cursor right.
é Press the cursor down to select the
"
Press the cursor right to instruct the TV to get the time
automatically or manually.
Auto clock channel
With the cursor buttons, select the channel number where time
can be found by the TV.Typically time can be found on PBS as
well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto
clock channel menu item can not be selected;
Time - Day
With the cursor buttons, select and enter the correct time and
day.
Though the Auto clock mode is automatic, you can enter the
time and day which, together with the selected channel, will be
overwritten once the clock information has been found.
If
Auto clock mode Manual
search has been done, the system will keep the entered time
and day.
Time zone (only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display for
your local time.
& Select
Time zone
é
Press the cursor right to select your local time zone.
Daylight saving (only available when Auto clock mode is set to
Automatic)
Daylight saving time is automatically set by specially broadcasted
signals.This menu item allows you to disable the automatic
setting of daylight saving time.This is useful if you live in an area
or state where daylight saving is not applied, but you receive
channels from other areas where daylight saving signals are
broadcasted.
& Select
Daylight saving
é
Press the cursor right to select
correction for daylight saving time, based on specially
broadcasted signals.
"
Select Off to disable automatic clock correction based on the
specially broadcasted signals.
Auto clock mode
has been selected, and no clock
with the cursor down.
with the cursor down.
Automatic
.
for automatic clock