Dvd Player Or Other Accessory Digital Source Devices - Philips Flat TV Manual

DVD Player or other accessory digital source devices

AV2
R Pr/R Y/G V S-VIDEO
L Pb/B CVBS H S-VIDEO
1 3
DVD / Cable Box
Notes
- The labels for the component video sockets may differ depending on the DVD player or the device connected.
Although the abbreviations may vary, the letters B and R stand for the blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD player's or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 720p (not with 42PF9966), 1080i
and 1152i as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which may
cause difficulties for the television to properly display.
: in case you notice scrolling images, wrong colors or no color, no picture, or even combinations of
Warning
these on your screen, check if the connections are done in the correct way or move your digital device further
away from your TV.
Devices with Component Video Output Connectors
AV1
(YPbPr)
R Pr Y
Connect the three separate component video cables 1
&
to the device having component video outputs (YPbPr),
such as DVD-players, laser-disc players, videogame
players, satellite receivers or other equipment, and to
L Pb
the
é Connect the audio cable to device's
2 jacks and to the
2
Devices with RGB output
&
Connect the device with RGB output with separate
Horizontal and Vertical sync to the
1 jacks and to the
é
Connect the audio cables to the
of
Devices with an S-Video connector
& Connect an S-Video cable to the
input.
Note: When using the
any device to the
é Connect the audio cables to the device's
R
the TV.
, and jacks of
Y Pb Pr
an
L
and
H
.
AV2
S-VIDEO
AV2 CVBS
jacks and to the and
L
or on the TV.
AV1 AV2
and
AUDIO L
audio jacks of or
R AV1
/ /
Pr Pb
R B Y/G
3.
jacks of
V AV2
and
L R AUDIO
or
AV1 AV2 S-VIDEO
connector do not connect
or input.
AV1 Y
AUDIO L
audio or jacks on
R AV1 AV2
R
.
AV2
input
jacks
and
21