Philips BDS4621 User Manual page 4

User Manual BDS4621
16. Damage Requiring Service - The appliance
should be serviced by qualified service
personnel when:
A.The power supply cord or the plug has
been damaged;
B. Objects have fallen, or liquid has been
spilled into the appliance;
C.The appliance has been exposed to rain;
D.The appliance does not appear to operate
normally or exhibits a marked change in
performance;
E. The appliance has been dropped, or the
enclosure damaged.
17. Tilt/Stability:
All displays must comply with recommended
international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design
standards by applying excessive pull force
to the front, or top, of the cabinet which
could ultimately overturn the product.
• Do not endanger yourself, or children, by
placing electronic equipment/toys on the top
of the cabinet. Such items could unsuspec-
tingly fall from the top of the set and cause
product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be
located away from power lines.
20. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure
the antenna system is grounded so as to
provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code,
ANSI/NFPA No. 70-1984, provides information
with respect to proper grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size
of grounding connectors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the
grounding electrode.
21. Object and Liquid Entry - Care should be taken
so that objects do not fall and liquids are not
spilled into the enclosure through openings.
22. Battery Usage CAUTION - To prevent battery
leakage that may result in bodily injury,
property damage, or damage to the unit:
• Install all batteries correctly, with + and -
aligned as marked on the unit
• Do not mix batteries (old and new or
carbon and alkaline, etc.)
• Remove batteries when the unit is not
used for a long time.
4