Philips BDS4621 User Manual page 38

User Manual BDS4621
Problem:
No Power
(Power indicator does not light)
'No Input Signal' message
appears.
The remote control does not
work.
Flashing spots or stripes appear
on the screen.
Image color or quality
deteriorates.
Screen position and size are
incorrect.
Image or color is incorrect.
Measures:
• Remove the power cable from the power
outlet for 10 seconds, then re-insert the plug
into the outlet.
• Check that the signal line is connected
properly.
• Check that the power of the relevant
peripherals is turned on.
• Check that the Input option that has been
selected matches the input signal.
• Check the batteries for correct placement.
• Replace with new batteries.
• Check to make sure the Remote Control is
within operating range.
• Check to make sure the Remote Control is
pointed to the Remote Control Window on
the Display.
• Check that there are no obstacles between
the Remote Control and the Remote
Control Window.
• For more information about the Remote
Control, refer to Chapter Basic Operation.
• Check that there is no emitter sources (Car,
HV cable or Neon lamp) or other possible
interference sources.
• Check that all the video settings are adjusted
appropriately, such as brightness, contrast,
color etc.
• For more information about video settings,
refer to 'OSD Functions' in the chapter 'Basic
Operation'.
• Check that the screen position and size is
adjusted appropriately.
• Check that the signal line is connected
properly.
• When connecting to a PC, you can change
the resolution of PC to acquire correct
image.The discrepancy of the PC output
signal may affect the display of the image.
38