Philips BDS4223V User Manual page 41

Explanation of Various Sound Control Settings
Explanation of each available sound control settings are listed in the table below.
BASS
Adjusts the BASS level of the sound. For more bass response, increase the BASS level.
TREBLE
Adjusts the TREBLE level of the sound. For more vocal and high frequency response, increase the TREBLE level.
BALANCE
Adjusts the BALANCE level between LEFT and RIGHT channels.
VOLUME
Use to adjust the monitor's volume..
SURROUND
This monitor is equipped with Surround Sound circuitry. Use Surround Sound to simulate a surround sound effect
if you are not using a multi-channel sound setup.
SPEAKER
Set to ON to turn on the monitor's internal amplification and internal speakers. Set to OFF to turn off internal
amplification and speakers. This setting will not affect AUDIO OUTPUT jacks.
AUDIO OUTPUT
Sets the type of audio output sent from the audio output jacks located in the rear of monitor. When set to
VARIABLE, audio output is affected by the monitor's internal volume controls . When set to FIXED, the audio
output bypasses the monitor's internal audio control so that functions such as bass, treble, surround and volume
controls have no effect.
39
User Manual BDS4223V