Table of Contents
Advertisement
Radio status
Status > Radio Status
Information about received and sent data as well as possible data transmission errors is
displayed in the Radio Status submenu.
Received power level
Transmitted power level
Carrier to interference and
noise ratio
Centre frequency of current
uplink channel
Centre frequency of current
downlink channel
Current channel size
Radio port uplink current aver-
age throughput
Radio port downlink current
average throughput
Current uplink modulation
scheme
Current downlink modulation
scheme
ì
If necessary, click on the Refresh button to refresh the data in the status display.
Range: from 0 dBm to –110 dBm
Readings above 0 dBm indicate possible overload traf-
fic on the RF interface, and in this case all other meas-
ured values are invalid. Averaging is carried out
according to the standard.
Current transmission power.
CINR = Carrier to Interference plus Noise Ratio. The
CINR calculation is based on the value of the downlink
measurement. Averaging is carried out according to
the standard.
Currently used uplink frequency. The reading changes
frequently during the measurement.
Currently used downlink frequency.
Currently used bandwidth.
Average approximate uplink throughput in 1 second,
moving average (5 samples).
Average approximate downlink throughput in
1 second, moving average (5 samples).
Currently used uplink modulation type.
Currently used downlink modulation type.
Internet
37
Advertisement
Table of Contents
