Cobra AM845 Manual page 9

Set CTCSS Privacy Codes
Mode/Power
Privacy Code
Channel Button
English
To select a CTCSS privacy code:
1. After selecting a channel, press
the Mode/Power button until the CTCSS icon
appears and the small numbers next to the
channel number flash on the display.
If DCS is turned on at the channel selected,
the display will flash the
CTCSS icon and "OFF." To switch from
DCS to CTCSS, press the Channel Up
or Channel Down button while the display
is flashing "OFF." The display
will then show the small numbers flashing
and you will then be able
to proceed to step 2.
2. Press the Channel Up or Channel Down button
to select a privacy code. You can hold the Up or
Down button for fast advance.
3. When your desired CTCSS privacy code is
displayed, choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call button to return to Standby
mode.
c. Do not press any buttons for 6 seconds
to return to Standby mode.
Nothing Comes Close to a Cobra
•
9
®