Lighting Installation Guide LED165/M400/740 Tether Kit BEFORE YOU BEGIN STOP Read these instructions completely and carefully. Save these instructions for future use. WARNING Risk of electrical shock. Disconnect power before servicing or installing product. Properly ground electrical enclosure. WARNING Check the ballast information. Make sure the ballast is in GE’s ballast compatibility list.
LED165/M400/740 Tether Kit Installation Guide Parts List: • 1 Steel Ring • 1 U-shape rod 2 mounted nuts • 3 High Temperature Lock Nuts (1 extra nut is provided for your convenience) • 1 Tether Kit includes: 1 tether wire (2m), 1 locker, 1 hook Instructions: Step 1.
Page 3
LED165/M400/740 Tether Kit Installation Guide Warning: Check the status of the E39 socket. Poor condition of the socket may result in electrical shock, overheat or lamp damage. If the socket shows signs of corrosion or arcing as shown in the pictures, replace the socket and the lamp (if it shows damage) GOOD Socket DAMAGED Socket...
Page 4
LED165/M400/740 Tether Kit Installation Guide Correct Assembly: WRONG Assembly: U-shape rod Wings of steel ring over the LED area NOT pointing away from the base Step 5 Hook the tether to either wing hole on the Steel ring. Step6 Screw the LED lamp with the mounted kit into the fixture.