Ptz Control; Ptz Settings - Hyundai DS-9600 Quick Operation Manual

Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR

PTZ Control

Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you set the PTZ camera.
Before you start, please check that the PTZ and the NVR are connected properly through RS-485 interface.

PTZ Settings

Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
2. Choose the camera for PTZ setting next to Camera label.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should be exactly the same as the PTZ camera parameters.
4. Click Copy if you want to configure same settings to other PTZ cameras.
5. Click the Apply button to save and exit the interface.
PTZ Control
In the Live View mode, you can press the PTZ Control button on the front panel or on the remote, or choose the
PTZ Control icon to enter the PTZ panel.
Icon Description
Direction button and
the auto-cycle button
Camera Settings Interface
PTZ Control panel
Description of the PTZ panel icons
Icon Description
Zoom+, Focus+,
37
Icon
Iris+
Description
Zoom-, Focus-, Iris-