Set Time; Set Conversion Rate; Set Tax/ Discount Rate - Sharp el-2630piii Operation Manual

 When
and displayed as "date" if the value is within the
following range; "Error" is displayed otherwise, and the
previously set date is restored.
Month: 1 - 12; day: 1 - 31; Year: 2000 - 2099 (in 4
digits) or 00 – 99 (in 2 digits)
Time:
 Enter in the order of hour, minutes, then press
complete the entry.
(There is no entry available for the seconds value. The
clock starts at zero second.)
 If the hour/minute digit is less than 10, it is not
necessary to enter the first digit "0".
 Use
 When is pressed, the number entered is evaluated and
displayed as "time" if the value is within the following
range; "Error" is displayed otherwise, and the previously
set time is restored.
Hour: 0 - 23 (24-hour system for the hour entry),
Minute: 0 – 59
Conversion rate:
 Press
 A maximum of 6 digits can be stored (decimal point is
not counted as a digit).
Tax / discount rate:
 Press
 Press
11 | P a g e
is pressed, the number entered is evaluated
to separate hour and minute values.
twice, enter the conversion rate, followed by
.
twice, enter the tax rate, followed by
twice, enter the discount rate, followed by
then .
to
.