• CPU INSTALLATION
Note : When heat sink is removed from CPU,
Thermal diffusion grease : silicon compound (G-765) 90G
Amount to apply
(Celeron)
install new ones after thermal diffusion
grease is wiped off and silicon compound
is applied to the place shown in the figure.
: 0.1 g (as the same size as the tip of a match) (Celeron)
0.5 g (as the same size as the tip of a match) (Pentium 4)
grease
(in the surface at the
splatter)
*
Take care not to apply the grease
to any other places because it has
high conductivity.
(Pentium 4)
2-15
grease
(in the surface at the
splatter)
Confidential
PCV-RX6__Series (AM)