Rear Panel; Bottom Panel - Alesis MELODY61 User Manual

Hide thumbs Also See for MELODY61:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
22. Fingered: Press this button after starting a rhythm to use the automatic chord
accompaniment and play a fingered chord on the keys in the AUTO BASS CHORD area
of the keyboard, which is F# and below. You can play all the keys of a chord, including
inverted chords. Press this button again to disable the chord function.
23. Chord Timbre: Press this button to change the musical tone of the notes in the
accompanying chord.
24. Metronome: The metronome contains four tempos: 1/4, 2/4, 3/4 and 4/4, respectively.
Press this button continuously to cycle through and select one of the four tempos. To
disable the metronome, wait 4 seconds and then press the button again.
25. Sustain: Press this button to activate a sustain effect which simulates a sustain pedal
when playing the keyboard. Press this button again to disable the sustain effect.
26. Vibrato: Press this button to activate a pulsating change to the pitch when playing the
keyboard. Press this button again to disable to vibrato effect.
27. Dual: Press this button to layer two sounds together. The sound that you were using
before pressing the Dual button will be used for one part of the layer. To select the other
sound for the layer, press the Chord Timbre button and enter a number for the sound or
use the + and – buttons. Press the Dual button again to disable the dual-tone function.
28. Split: Press this button to split the keyboard into two zones. The sound that you were
using before pressing the Split button will be applied to the left-hand side of the
keyboard. To select a sound for the right-hand side, press the Chord Timbre button and
enter a number for the sound or use the + and – buttons. Press the Split button again to
disable the keyboard split.
29. Keyboard Percussion: Press this button to play the built-in drumkit and percussion
sounds. Press this button again to disable the keyboard percussion function.
30. Effect: Press this button to select between one of five EQ settings for MP3 music
playback.
31. MP3 Volume Control: Adjusts the volume for the MP3 file playback.
32. Previous: Selects the previous MP3 track on the USB flash drive.
33. Next: Selects the next MP3 track on the USB flash drive.
34. Play/Pause: Playback or pause a MP3 file on the USB flash drive.
35. Stop: Stop the playback of a MP3 file on the USB flash drive.
36. Playback Mode: Select to playback order of continuous, random, and single.

Rear Panel

1.
USB Port: Connect a USB
flash drive here to playback
MP3 files.
2.
Audio
Input:
smartphone, MP3 player, or
similar audio device here to
play the audio signal through
the keyboard speakers or
headphone output.
3.
Mic Input: Connect a microphone here to sing while playing the keyboard.
4.
Phones/Output: Connect headphones here to hear the keyboard sounds, rhythms,
songs, audio input source, or microphone source.
5.
Power Input: Connect the included power adapter here.

Bottom Panel

1.
Battery
Compartment:
batteries here to power the keyboard if you
are not using the power adapter.
Connect
a
Install
UDISK
AUDIO
INPUT
1
2
6
"AA"
MIC
PHONES/
OUTPUT
3
4
9V
5
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents