Box Contents; Connection Diagram; Rear Panel Overview - Alesis Q61 Quick Start Manual

BOX CONTENTS

•
Q61
•
USB Cable
•
Quickstart Guide
•
Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM

Please refer to the following scenario for connecting the Q61.
1. Connect a USB cable from your computer to the
Q61. The unit will be powered through the USB
connection. Alternatively, if you do not wish to use
a computer in your setup or if you wish to power the
Q61 externally, please plug in a 9V DC, 500mA
power adapter, center-positive, 5.46mm barrel
diameter.
2. If you would like to use an external sound module,
connect a 5-pin MIDI cable from the KEYBOARD
MIDI OUT of the Q61 to the MIDI IN of the external
device.

REAR PANEL OVERVIEW

1. DC POWER ADAPTER INPUT – Plug
in a 9V DC, 500mA power adapter,
center-positive,
diameter (sold separately) if you do not
wish to power the Q61 through the
USB connection.
2. USB CONNECTION – Plug a standard
USB cable into this outlet and into the
USB port of your computer. The computer's USB port will provide power to the Q61. This connection is
used to send and receive MIDI data to and from your computer and may also be used to send MIDI
data from your computer to a device attached to the MIDI OUT port of the Q61.
3. MIDI OUT – Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI IN of an
external device. This jack sends the MIDI data output from the keyboard.
4. SUSTAIN PEDAL INPUT – Connect a 1/4" TS sustain pedal (sold separately) to this input.
5.46mm barrel
COMPUTER
(not included)
SUSTAIN
PEDAL
(not included)
4
3
2
POWER ADAPTER
(not included)
1
EXTERNAL
SOUND MODULE
(not included)
2 1