Manual de Instrucciones
Garantía Limitada
1
DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año
2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive,
Harrison, Ohio 45030 Teléfono: (800) 543-6400
3. QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del producto
Campbell Hausfeld.
4. PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld proporcionada o
fabricada por el garante.
5. COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del período de
validez de la garantía.
6. LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
A. Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES PARTICULARES, ESTAN
LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto es empleado para uso comercial,
industrial o para alquiler, no se aplicará ninguna garantía. En algunos estados no se permiten limitaciones a la
duración de las garantías implícitas, por lo tanto, en tales casos esta limitación no es aplicable.
B.
CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN DEFECTO,
FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados no se permite la
exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales casos esta limitación o exclusión
no es aplicable
C.
Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de
funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes, abusos por
parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual de instrucciones
suministrado también debe incluir la desconexión o modificación de los instrumentos de seguridad. Si dichos
instrumentos de seguridad son desconectados, la garantía quedaría cancelada.
D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
7.
RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el Garante, los
productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de funcionar adecuadamente,
durante el período de validez de la garantía
8.
RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado Campbell
Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los) manual(es)
del propietario
Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos. Usted también
puede tener otros derechos que varían de un Estado a otro. o de un país a otro.
20 Sp
See Warranty on page 6 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instructions for future reference.
BUILT TO LAST
Description
DG490500CK
Bench grinders are useful for
sharpening tools (drills, scissors, chisels,
etc.); refacing tools (removing burrs
from tool edges); and removing
material as wanted.
The two different types of wheel allow
the grinder to meet various needs.
Typically, use the coarse grinding wheel
for rough cutting -- removing a larger
amount of material. Use the medium
wheel for finishing to leave a smoother
surface.
Unpacking
When unpacking this product, carefully
Specifications
inspect for any damage that may have
occurred during transit.
DG490500CK
Voltage
General Safety
Power Rating
Information
H.P.
This manual contains information that is
R.P.M.
very important to know and understand.
Wheel Sizes
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
Weight
To help recognize this information,
observe the following symbols.
CALIFORNIA PROPOSITION 65
Danger indicates
DANGER
DANGER
!
!
an imminently
hazardous situation which, if not
create dust when you cut,
avoided, will result in death or serious
sand, drill or grind materials
injury.
such as wood, paint, metal,
concrete, cement, or other
Warning indicates
WARNING
!
masonry. This dust often contains
a potentially
chemicals known to cause cancer, birth
hazardous situation which, if not
defects, or other reproductive harm. Wear
avoided, could result in death or serious
protective gear.
injury.
Caution indicates a
CAUTION
WARNING
!
!
potentially
hazardous situation which, if not
power cord contains chemicals known to
avoided, may result in minor or moderate
the State of California to cause cancer
injury.
and birth defects or other reproductive
harm. Wash hands after handling.
Notice indicates
NOTICE
important
The following safety precautions must be
information, that if not followed, may
followed at all times along with any
cause damage to equipment.
other existing safety rules.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2006 Campbell Hausfeld/Scott Fetzer
For parts, product & service information
visit www.chpower.com
DG490500CK, DG490700CK
Bench Grinder
with Lamp
DG490700CK
Specifications
DG490700CK
120V 60Hz
Voltage
120V 60Hz
4.7 A
Power Rating
10 A
3/4
H.P.
1/2
3550
R.P.M.
3550
8" x 3/4" x 5/8"
Wheel Sizes
6" x 3/4" x 1/2"
30 lbs.
Weight
23.5 lbs.
1. Read all manuals included
with this product
You
carefully. Be thoroughly
can
familiar with the controls
and the proper use of the
equipment.
2. Only persons well acquainted with
these rules of safe operation should
be allowed to use the tool.
WARNING
!
Safety
This product or its
glasses and ear protection
must be worn during
operation.
3. Do not wear loose fitting clothing,
scarves, or neckties in work area.
Loose clothing may become caught
in moving parts and result in serious
personal injury.
IN713800AV 3/06
S
MANUAL