Remote Control Batteries; Single Cable Between The Tv Hub And The Tv Screen; Antenna Cable; Power Cable - Philips 42PES0001D/H User Manual

3.6

Remote control batteries

) Caution
This product contains lithium batteries. There is
danger of explosion if the batteries are incorrectly
replaced. Replace only with the same or equivalent
type.
‡ Open the battery cover on the back of the
remote control.
® Make sure the + and sides of the batteries line
up correctly (inside of case is marked.)
Ò Close the cover.
rNote
Remove the batteries if not using the remote
control for an extended period of time.
3.7 Single cable between the
TV hub and the TV screen
‡ Insert the supplied Essence Single cable into the
respective connectors at the back of the TV
hub and at the back of the TV screen.
Use your TV
3.8

Antenna cable

‡ Locate the antenna connection at the back of
the TV hub.
® Insert the antenna cable tightly into the
Antenna x socket.
3.9

Power cable

Keep the mains plug at the wall socket accessible at
all time.
The TV is never powered off completely and
consumes energy unless the mains cord is physically
unplugged.
Although this TV has a very low standby power
consumption, unplug the mains cord if you do not
use the TV for a long time to save energy.
‡ Verify that your mains voltage corresponds with
the voltage printed on the sticker at the back of
the TV hub. Never insert the mains cord if the
voltage is different.
® Insert the mains cord tightly.
ANTENNA
7