Cleaning; Storage - Profi Cook PC-EKI 1016 Instruction Manual

Электроплита индукционная PROFI COOK PC-EKI 1016
Купить в интернет-магазине http://clatronic-shop.com.ua
Switching off
• Press the ON/STANDBY button (6).
NOTE:
• The hot plate is reset from its operational
state to standby mode. The fan may con-
tinue to run for a period of time.
• A signal sounds and the indicator lamp on
the ON/STANDBY button (6) flashes.
• As long as the hot plate is still hot, a "H"
flashes on the display.
• Pull the plug.
• Let the device cool down, before you put it
away.
Pan recognition
The device has a pot recognition function. The
cooking plate sounds a continuous beep tone
to communicate that the pot was removed and
returns to standby mode. The fan may continue
running.
In this context, please pay attention to the
following:
WARNING:
After use, the hot plate is to be switched off by
means of its regulation and control devices [ON/
STANDBY button (6)] and not just by pan
recognition.
WARNING: Hazard of burns!
Because of the heat radiated during cooking,
dangerously high temperatures may occur at the
cooking zone after the cooking cycle.

Cleaning

WARNING:
• Always remove the mains lead before
cleaning!
• Wait until the machine has cooled down
completely.
• Under no circumstances should you immerse
the device in water for cleaning purposes.
Otherwise this might result in an electric shock
or fire.
44
WARNING:
• Under no circumstances should you immerse
the device in water for cleaning purposes.
Otherwise this might result in an electric shock
or fire.
CAUTION:
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
Ceramic Hob
• Clean the surface from food remains when it's
still warm using a moist cloth or tissue.
• Wash the hob using a soft sponge and some
water, then wipe dry with a soft cloth.
• Cleaning agent for glass-ceramics surfaces:
In case of stubborn, baked-in remains, use
suitable cleaning products available at special
departments of department stores.
Housing
• Clean the housing after use using a slightly
moist cloth.
• Make sure that no fluid matter gets into any of
the openings of the housing. This might dam-
age the device or result in an electric shock.

Storage

• Only store the appliance clean and after it has
cooled down.
• During longer periods of non-use we recom-
mend storing the appliance in its original
packaging.
• Always store the appliance in a well-ventilated
and dry place out of reach of children.
CAUTION: Risk of breakage!
Please remember that the CERAN
be damaged by heavy or falling objects.
®
surface can