Changing Picture And Sound Settings - Philips 40PFL5705DV User Manual

Changing picture and sound settings

You must set [Home] in [ Location]. (Refer to page 30.)
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
Changing picture settings
1
Press MENU on the remote control.
2
Use Î / ï / Í / Æ to select [ Setup] > [ Picture].
Settings assistant
Picture
Contrast
Sound
Brightness
Color
Features
Tint
Installation Sharpness
Color temperature
Software update
Dynamic contrast
3
Use Î / ï / Í / Æ to select one of the picture settings, and press OK
to enter the setting.
4
Adjust the picture quality.
The following picture settings can be confi gured. Depending on
the format of the picture source, some picture settings are not
available.
Setting items Description
Use [ Settings assistant] to guide you through
Settings assistant
the best picture and sound settings.
Adjusts the intensity of bright areas, keeping
Contrast
dark areas unchanged.
Brightness Adjusts the intensity and details of dark areas.
Color
Adjusts color intensity.
Tint Adjusts the color balance in an image.
Sharpness
Adjusts the level of sharpness in image details.
Cool More blue tones.
Color
Normal
Standard tones.
temperature
Warm More orange tones.
Off
Sets Dynamic contrast to off.
Dynamic
contrast
On Automatically enhances contrast in an image.
Off
Sets Digital Natural Motion to off.
Digital Natural
Minimum Makes an image smoother.
Motion
Maximum
Makes an image smoothest.
Off Sets Noise reduction to off.
Noise
reduction
On
Reduces noise in an image.
Off Sets MPEG artifact reduction to off.
MPEG artifact
Reduces a blockiness and a blurriness and
reduction
On
judder by digital filter.
Off Sets Color enhancement to off.
Color
enhancement
On
Makes colors more vivid bright colors.
EN
22
Start now
Cool
Off
Setting items Description
Off
Sets Active control to off.
On with Adjusts backlight for the best picture quality by
Light dynamically adjusting the backlight intensity in
Active control Sensor accordance with lighting condition in the room.
On without
Adjusts backlight for best picture quality based
Light
on the incoming video signal.
Sensor
Automatic
Super zoom
4:3
Movie
expand 14:9 Refer to 'Summary of picture formats' on
Picture format
page 23.
Movie
expand 16:9
Wide
screen
Unscaled
Turns off image enhancement features which
PC
makes the TV to act purely as a monitor.
Mode selection
Enables image enhancement features to
HDTV
improve picture quality.
The horizontal / vertical position, clock and
Auto adjustment phase of the PC screen are automatically
adjusted.
Clock
Setting to stabilize the PC screen.
Phase Setting to improve the clarity of the PC screen.
Adjusts the horizontal position of the picture
Horizontal shift
for PC screen.
Adjusts the vertical position of the picture for
Vertical shift
PC screen.
5
Press MENU to exit.
Note
•
[ Mode selection] will not be displayed when incoming signals are other than
720 x 480p 60Hz, 1280 x 720p 60Hz and 1920 x 1080p 24 / 30 / 60Hz.