Configuring Samsung Link Settings
Samsung Link must first be configured prior to its initial use.
You must set up parameters such as connected Wi-Fi, Items
to share, source server address, and external device
acceptance rights.
1. From the Apps screen, touch
DEVICES & STORAGE tab.
Touch
2.
Menu and then touch Settings and
configure the following settings as desired:
• Registered storage: Add a Web storage location. Without a
storage service/location added, you will not be able to use
Samsung Link.
• My device: Display your device name as it is used with
Samsung Link. Touch to change the device name.
• Save to: Save your media to your internal phone memory or to
an SD card.
• Auto upload: Enable automatic upload of images from your
device to those storage locations specified within the Web
storage list. Touch and slide the slider to the right to turn it
on
.
139
Samsung Link
DRAFT - For Internal Use Only
• Video optimization: Set up the video quality for streamed
video content. Touch and slide the slider to the right to turn it
on
.
• Password lock: Restrict access to Samsung Link by requiring
a user enter the currently active and associated Samsung
account password. Touch and slide the slider to the right to turn it
on
.
• My account: Samsung account information.
• Customer support: Contact the Samsung Link team by way of
a new email from an available email account.
• About this service: Display application information
Sharing Media via Samsung Link to a Target
Device
Important! Make sure all communicating devices are
connected to the same Wi-Fi.
1. Launch AllShare Play or Samsung Link on the target
device (such as an Internet TV, Samsung Tablet, and
so on).
2. From the Apps screen, touch
Samsung Link.