Location Of Controls And Components - Panasonic DMP-BD45EB Service Manual

5 Location of Controls and Components

1
2
3
4
5
6
7
8
9
10
11
Pull to flip down
the front panel.
1 Standby/on switch ( /I)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Disc tray
3 Display
Disc indicator
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
12
13
[BD45]
14
15
16
17
18
19
20
21
22
1 2
USB device
SD card indicator
indicator
1 Power Button
2 TV operation buttons
You can operate the TV through the unit's remote control.
[ TV] : Turn the television on and off
[AV] : Switch the input select
[ VOL] : Adjust the volume
[ CH] : Channel select
3 Number buttons and CANCEL button
4 DISPLAY button
5 PIP(Picture-in-picture) button
6 Basic playback control buttons
7 STATUS button
3
8 POP-UP MENU button
9 TOP MENU/DIRECT NAVIGATOR button
10 OPTION button
11 Coloured buttons (red, green, yellow, blue)
These buttons are used when;
23
Operating a BD-Video disc that includes Java
applications (BD-J).
Displaying "Title View" and "Album View" screens.
Operating contents of VIERA CAST. [BD65]
12 Transmit the remote control signal
13 OPEN/CLOSE button
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
injury.
14 Volume up/down button (Amplifier/receiver)
15 AUDIO button
16 RE-MASTER button
17 Select drive (BD/DVD/CD, SD card or USB device) button
18 [BD65] VIERA CAST button
19 EXIT button
20 FUNCTION MENU button
21 Selection/OK, Frame-by-frame buttons
22 RETURN button
23 [BD45] SECONDARY AUDIO button
SD CARD
6 7
4 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20 up and down, 30 left and right
5 Open or close the disc tray
6 SD card slot
7 USB port
8 Stop
9 Start play
13
TM
3 4 5
8 9