Environmental Considerations - Vision V700-T20BJ Installation Manual

Environmental Considerations


Do not install in areas with: excessive or conductive dust, corrosive or flammable gas,
moisture or rain, excessive heat, regular impact shocks or excessive vibration, in
accordance with the standards given in the product's technical specification sheet.

Do not place in water or let water leak onto the unit.

Do not allow debris to fall inside the unit during installation.
 Ventilation: 10mm space required between controller's top/bottom edges & enclosure walls.

Install at maximum distance from high-voltage cables and power equipment.
Mounting
Dimensions
Note that the Snap-in I/O module thickness is 23 mm (0.9").
2
Vision™ Installation Guide
Unitronics