Advertisement
M503 OPERATING INSTRUCTIONS
Battery Instructions
The M503 operates on 4 x standard Alkaline "AA" batteries, first remove
the battery compartment cover by undoing the black locking knob. Insert
batteries into the battery compartment as indicated, make sure the polarities
are correct before replacing the cover.
Levelling and Turning on Laser
Screw the bottom base of the M503 laser onto the ground, a tripod (included
in M50322 kit) or wall mounted then level the laser by first turning the
levelling wheel for the "X" while looking at the "X" vial above it, once the
bubble is central in the vial adjust the "Y" axis in the same manner using the
"Y" vial levelling wheel, continue adjusting both axis until both top vials show
the bubble exactly central (NOTE: the more accurate you are at setting the
vials the more accurate the level will be). Once level, power up by rotating
the black power button knob, the head will rotate and laser emit.
www.level1lasers.com.au
4
"Y" Axis
Vial and Levelling
Wheel
(Horizontal Operation)
"X" Axis
Vial and Levelling
Wheel
Advertisement
