Backup Battery Replacement - VTech InnoTV User Manual

Cleaning the InnoTV™ Console and Controller:
• Keep your InnoTV™ console and controller clean by wiping them with
a slightly damp cloth. Never use solvents or abrasives.
If your InnoTV™ does not respond to an inserted cartridge, please carefully
try the following:
• Turn off the InnoTV™ console and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based
window cleaner to gently clean the contact area of the cartridge slot.
• If necessary, dry all the clean contact areas with a soft, lint-free cloth.
• Make sure that all parts are completely dry before restoring electricity.

Backup Battery Replacement

• Make sure the console is turned off.
• Locate the battery cover on the back of the console, and then open
it with a screwdriver as shown in the image below.
• Insert a CR2032 battery into the battery compartment with the "+"
side facing up as shown in the image below.
• Make sure to replace the battery cover.
Static electricity may cause the InnoTV™ to malfunction. In some cases,
the game play score stored in the console memory may be lost. In cases
where the InnoTV™ has malfunctioned due to static electricity, disconnect
the power by unplugging the Power Adaptor jack from the back of the
console. Reconnect the Power Adaptor jack, and press the Power button
to turn the unit on again. If the static electricity malfunction occurred
during the file transferring process, reset the console as described above
and try again. Then reconnect the USB cable and restart the file transfer
process. For more information and troubleshooting tips, visit
www.vtechkids.com/tutorials/innotv.
4