CONTENTS CONTENTS Important Safety Warnings Precautions Preparations What’s included About Discs Front/Rear View Remote Control Connections Connecting to a TV Connecting to a digital audio system Connecting to Internet Playing a Disc Getting Started Using the Title Popup Menu Using the DVD Menus Using the OSC (on-screen control) Menu Displaying the Disc Information Resuming Playback from the Point Where Playback Stopped...
IMPORTANT SAFETY WARNINGS IMPORTANT SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash and CAUTION: TO REDUCE THE RISK OF The explanation point within Arrowhead within the triangle ELECTRIC SHOCK, DO NOT REMOVE...
IMPORTANT SAFETY WARNINGS Copyrights and Trademarks European Community. DVD Video is a trademark of DVD Format/Logo Licensing Corporation. Blu-ray Disc , Blu-Ray , Blu-Ray 3D , BONUSVIEW , and the logos are trademarks of the Blu-ray Disc Association. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
PRECAUTIONS PRECAUTIONS Security • Before operation, check if the voltage of this player is in line with the local voltage. • Hold the plug to disconnect the player from the mains outlet. Do not pull the power cord. • The player is not disconnected from the AC power source as long as it is connected to the mains outlet, even if the player itself has been turned off.
PREPARATIONS PREPARATIONS What’s included Blu-ray Disc Player SB36K1U User Manual with Warranty Card Remote Control About Discs Both the players and the discs are coded by region. The disc and player code must match in order to play the disc in the player. (The region code for this player is labeled on the rear panel of the player).
PREPARATIONS Front / Rear View Disc Tray Open to load a disc. Eject button Press to open or close the DISC Tray. PLAY/PAUSE button Press to PLAY or PAUSE the loaded disc. IR (Infrared Receiver) Receive IR signals from the remote control. ON/OFF button Illuminates WHITE when the player is on;...
PREPARATIONS Remote Control Press and slide the back cover to open the battery compartment of the remote control. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment.
Page 10
PREPARATIONS 17. DISC MENU Return to the main menu of the loaded DVD. 18. POPUP View the popup/title menu on supported discs. Allow you to navigate the OSD menus and adjust the system settings to your preference. 20. OK Confirm the selection in the OSD menus. 21.
CONNECTIONS CONNECTIONS Do not connect the AC power cord until all the connections are complete. Be sure to make connections firm to avoid hum and noise. Refer to the User Manual for detailed connection procedures to make sure the TV, Amplifier and other devices are connected to the Blu-Ray Player correctly.
CONNECTIONS Connecting to a digital audio system Using the digital audio cable, connect the COAXIAL socket of the player to the COAXIAL IN socket of the Digital Amplifier. Turn on the player and the Amplifier. Select correct external input on the Amplifier. Connecting to Internet Using the network cable, connect the LAN socket of the player to the LAN socket of the Broadband Router/Modem.
PLAYING A DISC PLAYING A DISC Some playback operations of Blu-ray Disc, DVDs and VIDEO CDs may be intentionally fixed by software producers. Since this player plays Blu-ray Disc, DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available.
PLAYING A DISC Using the OSC (on-screen control) Menu Some basic operations can be done through the on-screen controls, such as selecting the desired title, chapter, audio language etc. Press the OPTION button to display the on-screen control menu during playback. Press the buttons to make the desired selections, and then press the OK button.
PLAYING A DISC Repeat Press the REPEAT button to select the repeat mode. A single title, chapter, track or the entire disc can be played back repeatedly. • BD: Repeat CH / Repeat TT / Repeat Off. • DVD: Repeat CH / Repeat TT / Repeat All/ Repeat Off. •...
PLAYING A DISC Zoom Playback Images can be zoomed in or zoomed out on the screen to your preference. Press the ZOOM button repeatedly to cycle the zoom mode: ZOOM 2 /ZOOM 3 /ZOOM 4 / ZOOM 1/2, ZOOM 1/3, ZOOM1/4, OFF. Press the buttons to move the enlarged or shrunken image.
PLAYING A DISC Selecting the Audio Language The Blu-ray player has a function which allows you to select the desired audio language and active the secondary audio language. Press the AUDIO button repeatedly to select the desired audio language during playback. Press the PIP AUDIO button to select the audio language for PIP.
ADJUSTING THE SETUP ITEMS ADJUSTING THE SETUP ITEMS Press the SETUP button on the remote control to display the setup menu. • • Press the buttons to navigate and select the desired menu. General Settings System • Screen Saver: Select to turn On/Off screen saver.
Page 19
ADJUSTING THE SETUP ITEMS Language • OSD: Select the on-screen-display (OSD) language: English/Español/Deutsch/French/ Portugues/ 日本語 / 简体中文 / 繁體中文 . • Menu: Select the language for disc menu. • Audio: Select the language for disc audio. • Subtitle: Select the language for disc subtitle. Playback •...
ADJUSTING THE SETUP ITEMS Display Settings • TV Screen: Depending on the TV’s aspect ratio, you may want to adjust the screen setting. Standard video (4:3) on a wide-screen TV (16:9) 16:9 Full: The image fills the entire screen, but it stretches horizontally.
ADJUSTING THE SETUP ITEMS Closed Caption • CC Attribute: Close caption settings: Auto/Custom. • Font color: Adjust the CC color. • Font size: Adjust the CC font size: Default / Standard / Small / Large. • Font style: Adjust the CC font style. •...
SPECIFICATIONS SPECIFICATIONS Model No. SB36K1U Power Requirements AC 100-240V, 50/60Hz Power Consumption N.W: 2.73 lbs. Weight General G.W: 3.74 lbs. Dimensions 14.17(L)*9.84(D)*1.96(W) inches Operating Temperature Range +5°C to +35°C Operating Humidity Range 10% to75% Signal System PAL/NTSC Composite Video 1 Vp-p (75Ω)
After the one (1) year Warranty period, you must pay for all labor charges. PARTS : For a period of one (1) year from the date of original consumer purchase, SEIKI will supply, at no charge to the original consumer, rebuilt or refurbished replacement parts in exchange for defective parts, or will replace the Product with refurbished product of similar or better quality, at SEIKI’s option, at no charge to the original consumer.