Page 1
EASYCHEF STAINLESS STEEL EC24/R & EC30/R BARBECUE AND ROTISSERIE EC24 (Island not Included) EC30R - Shown with Side Burner FOR YOUR SAFETY FOR YOUR SAFETY If you smell gas: 1. Do not store or use gasoline or other 1. Shut off gas to the appliance.
We suggest covering your grill when not in use. Covers are available from your dealer, For the EC30 ask for P/N 10573 or 10574; for the EC24 ask for P/N 10749 or 10750 depending on your installation.
See instructions in this manual for correct procedure. Do not use charcoal in this appliance. Do not use the EasyChef Barbecue if there is a LP Units -LP-gas supply cylinder to be used must gas leak present. be constructed and marked in accordance with the specifications for LP-gas cylinders of the U.S.
(figure 6). If any components have Your EasyChef grill head and major components are moved or are not aligned, loosen the (2) #10 nuts factory assembled for your convenience. However, there securing the burners and re-align.
Page 5
Note: There are (14) briquettes on the (5) baffles for the EC30 for a total of (70) briquettes. The EC24 has (11) briquettes on each of the (4) baffles for a total of (44) briquettes. 3) Install (2) of the stainless grids onto the top mounting rails.
Page 6
shutter with a phillips screw driver and adjust as necessary. Rotisserie Assembly: 8) Close hood with main burners set on “HIGH” and 1) Attach motor brackets to the right or left side of allow grill to operate for 30 minutes. This will allow the grill using (2) 1/4"...
OPERATING INSTRUCTIONS LIGHTING MANUAL LIGHTING 1) Open lid. DANGER Failure to open lid while igniting the 2) Check to make sure the burner control knobs are barbecue, or not waiting 5 minutes to in the “OFF” position. allow the gas to clear if the barbecue 3) Turn gas supply “ON.”...
Page 8
Smoking meats or fish requires the EasySmoker tray. Adding smoking chips to the EasySmoker tray before Your new EasyChef grill is designed to perform as a starting your grill is the simplest way. Position the tray standard open top grill or as a closed top broiler.
Solution - Push ignitor button and watch for sparking Remove all loose materials from burners and between the electrode and ignitor box for the EC30 or match light carryover for the EC24. If no sparks are cabinet. visible, replace battery by unscrewing the button top.
Page 10
EasyChef EC24 Item Description Item Description Cooking Grill 110251 Rotis Venturi 110249 Briquette 110182 Adapter Box 200727 Briquette Support Baffle 200956 Electrode 120062 Burner - Main 110242 Electrode Wire 120064 Venturi - Right Hand 110241-1 Rotis Burner 300211 Venturi - Left Hand...
Page 11
EasyChef EC30 Item Description Item Description Cooking Grill 110254 Adapter Box 200727 Briquette 110182 Electrode 120062 Briquette Support Baffle 200708 Electrode Wire 120064 Burner - Main 110175 Rotis Burner 300211 Venturi - Main 110176 Heat Shield 200746 Front Panel Graphic 140229 Motor Support.