Satellite Receiver - Philips 32PW8808/79R Instruction Manual

Satellite Receiver

SAT
IN
≈
Satellite Receiver with a recorder
Monitor
out
VIDEO
L /Mono
AUDIO
5
R
75
OUT
IN
OUT
IN
REC
DVD player or other accessory digital source equipment
Monitor AV 1 AV 2
out in
VIDEO
Y
L
Pb
AUDIO
R
Pr
Equipment with AV connectors only
&
Connect the video cables to the
equipment's
AV OUT
TV's or
AV1 AV2 IN
é
Connect the audio cables to the
equipment's
AUDIO L
the and
L AUDIO
jacks on the TV. (According to where you
connected the video cables, to
.)
AV2
Equipment with an
connector
&
Connect an S-video cable the
input.
S-VIDEO
Note: When using the
do not connect any device to the video input.
é
Connect the audio cables to the
equipment's
AUDIO L
the and
L AUDIO
on the TV.
AV 1
Monitor AV 2
in
in
out
VIDEO
Y
L / Mono
Pb
AUDIO
2
R
Pr
OUT
SAT
AV 2
AV 1
in
in
Y
S-VIDEO
Pb
3
Pr
SAT
IN
OUT
4
≈
SAT
in
S-VIDEO
jacks and to the
jacks.
and jacks and to
R
or
R AUDIO AV1
or
AV1
S-VIDEO
AV2
connector
S-VIDEO
and jacks and to
R
jacks
R AUDIO AV2
& Connect the satellite antenna cable 1 to the
satellite receiver's
é
Connect the Video, Audio left and right (only for
stereo equipment), AV cables 2 to the
S-VIDEO
and
R AUDIO
If your satellite receiver has an S-VHS video
jack:
For improved picture quality, connect an S-VHS video
cable with the
the satellite receiver to the
&
Connect your satellite receiver as described above.
é Connect the RF Antenna or Cable TV cable 1 to
the
RF IN
" Connect another RF cable 2 from the output of
CABLE
your recorder to the TV's 75 ø x jack.
' Connect the satellite antenna cable 3 to the
satellite receiver's
( Connect the AV cables 4 to the satellite receiver's
AV OUT
§
Connect the recorder's
AV2 IN
With Component Video Output Connectors
&
Connect the cables of your
the
YPbPr
Note: When using the YPbPr sockets do not connect any
device to the video input of AV1.
The YPbPr sockets on the TV are compatible with 480i
(interlaced, 1 Fh) output signals only, not 480p
(progressive scan, 2 Fh).
é
Connect the Audio left and right (only for stereo
devices) cables to the
Equipment with Progressive scan output (480p,
576p or 1080i 2 Fh)
AV2
Connect the equipment to the
on the TV. See
page.
Note: The labels for the component video sockets may
differ depending on the DVD player. Although the
abbreviations may vary, the letters B and R stand for the
blue and red component signals, respectively, and Y
indicates the luminance signal. Refer to the DVD player's
instructions for use for definitions and connection details.
Connect Peripheral equipment
SATELLITE IN
input jacks.
AV1 IN
input instead of connecting
S-VIDEO
VIDEO
socket of your recorder.
SATELLITE IN
jacks and to the VCR's
AV OUT
jacks.
YPbPr
input sockets on the TV.
AV1 IN
AUDIO L
or Digital HD input, next
AV3 AV4
jack.
,
VIDEO L
jack of .
AV2 IN
jack.
jacks.
AV IN
jacks 5 to the TV's
equipment to
and input of .
R AV1
or jacks
AV3 AV4 IN
17