Tv Menu; Picture Menu; Sound Menu - Philips 32PW8808/79R Instruction Manual

TV menu

B
w
VCR DVD AMP AUX
fi
b S
PIXEL
PLUS
b
x
MENU
OK Ï
V ¬
CH
1 2 3
4 5 6
Picture
TV
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Smart picture
Picture format

Sound menu

Sound
TV
Volume
Balance
Equalizer
(Loudness)
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume
Smart sound
return or switch
main menu on/off
cursor to select
adjustments
key to
OK
activate
Sound Features
Ï key on the remote control to
Press the
MENU
summon the main menu.
Use the on-screen Menu-Info, see p. 7, for more
information about the menu items.

Picture menu

Press the cursor right to select
Select the menu items in the Picture menu with the cursor
up/down.
Adjust the settings with the cursor left/right or enter the
list of submenu items with the cursor right.
Select a submenu item with the cursor up/down.
Note: To remove the menu background before adjusting the
picture settings, see Select TV setup, General, p. 10.
Digital options
With PAL signals:
Digital Natural motion
motion) is the most ideal setting, but you may consider,
dependent on your own preference, to select
(100 Hz + Digital scan without motion
Dig. scan
compensation).
Dig. Nat. Motion 1250
which adds astonishing sharpness + motion compensation).
With NTSC signals:
The possible options are
compensation, or
Dig. nat. Motion 1250
Note: if the menu item Digital options is not present, first select a
4:3 picture format with the q key.
The modified adjustments for Contrast, Brightness, Colour,
Sharpness,Tint, Digital options and Dynamic Contrast are
automatically stored.
Select Factory settings in the Setup menu, General, to
restore the predefined factory settings, see p. 10.
Press the cursor right to select
Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor left/right.
Remember, control settings are at normal mid-range levels
when the bar scale is centred.
Note:
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo
transmission.
- Nicam/Analogue is only selectable in case of Nicam
transmission.
- Surround modes can not be modified when a headphone has
been connected.
- You can also select one of the Surround modes with the Q
key on the remote control. See p. 4.
Use of the menus
.
Picture
(100 Hz + Dig. scan + Natural
(a doubling of vertical resolution
, without motion
Progressive scan
.
.
Sound
100 Hz
11 11