Canon POWERSHOT A470 Getting Started page 293

Problems
Try the suggested solutions to the common problems listed below.
•
USB driver installation not proceeding well (Windows 2000).
Uninstall the driver (p. 67) before reinstalling it with the procedures in
Installing
the Software and USB Driver
(p.
11).
Add New Hardware Wizard or New Hardware Found (Windows 2000)
Wizard displays when the camera is connected to the computer with an
interface cable (Windows).
Click [Cancel] to close the window. Temporarily disconnect the camera from the
computer. Next, read
Start by Checking This
on the previous page and resolve
the problem.
!
7
Cannot download images or shoot remotely. (For cameras connected to
the computer via an interface cable: only cameras supporting Hi-Speed
USB 2.0).
The problem may be resolved by lowering the transmission speed for data by
following the procedures below.
Solution:
Hold the
MENU
button on the camera down and press the
~IN'
(Print/Share)
button and
FUNC./SET
button simultaneously. In the displayed screen, select [B]
and press the
FUNC.lSET
button.
n
Images won't download into a TWAIN-compliant program (Camera and
computer connected via interface cable (Windows 2000».
Click
[Operate Images on Camera]
in CameraWindow and click
[8]
in the View
Window to close it.
mill!! I 2 •
Camera not detected, Events dialog won't display or images will not
download to the computer (when camera is connected to the computer
via an interface cable (Windows».
Cause 1:
The USB Driver may not be correctly installed (Windows 2000).
Solution:
Install the USB driver with the procedures in
Installing the Software and USB
Driver
(p. 11). Then connect the camera to the computer with the interface
cable and prepare it to transfer data. If the USB driver is already installed,
uninstall (p. 67) it first and then reinstall it.